Flexible grounding body HD-R10 is mainly used for grounding network of buried resistance reduction; the original metal grounding body corrosion effect is relatively poor, in addition is not suitable for mountainous areas, especially rocky areas to use, flexible grounding body HD-R10 is suitable for grounding resistance reduction in mountainous rocky areas, not subject to geographical conditions, can be made on site, according to the site conditions molding, no corrosion of the metal connection body, good resistance reduction effect, this flexible The grounding body is composed of non-metallic conductive powder, polymer materials and microfiber adhesive. Its use is not limited by environmental conditions, as long as the amount of construction can receive the effect of resistance reduction, long service life, resistance reduction effect is stable.
A remarkable feature of flexible grounding body HD-R10 is that it can form an irregular shape and an effective contact area between it and the medium, thus obtaining a good resistance reduction effect. This is something that no grounding pole and grounding module could do in the past.
Construction of flexible grounding body
(1) Flexible grounding body is a kind of compound formula product. It includes:
conductive agent, preservative, blending agent, flexibility agent, channel agent,
coagulant, catalyst, etc.
(2) First dig the grounding trench, weld the horizontal grounding body, and the
vertical grounding electrode.
(3) Open the lid of the barrel and take off the two bags of raw materials stuck to
the inner lid.
(4) Open the plastic bag and turn the plastic bag over to the outside of the
barrel with a wooden stick into the barrel to stir the sediment and liquid. (When the
temperature is low, you should use a heating rod to warm up the liquid in the barrel
to about 30 degrees)
(5) Open the two external bags of raw materials and add them to the liquid and
stir well, and take them to the edge of the ditch, or the pit, to be used.
(6) As vertical pouring can be poured directly.
(7) If you do horizontal pouring, you need to keep stirring slowly until the
resistance of the liquid in the barrel increases and becomes sticky like porridge, then
pour it into the trench to wrap the horizontal grounding body and form a long line of
pouring while pouring.
(8) wait for its solidification to form with elastic grounding conductor, at this
time will no longer dissolve in water, can be backfilled, the construction of flexible
